The answer
The Mr Blue 2.0 uses a default groove depth and width of 0.60 mm. The allowed depth is 0.20–1.20 mm and the allowed width is 0.60–1.20 mm, both adjustable in 0.05 mm steps.
Filed under Settings & modes
For automatic grooving, the machine starts with a groove depth of 0.60 mm and a width of 0.60 mm. These are defaults, not the only values available.
| Setting | Default | Minimum | Maximum |
| Depth | 0.60 mm | 0.20 mm | 1.20 mm |
| Width | 0.60 mm | 0.60 mm | 1.20 mm |
If both dimensions are to be below the normal default, the manual specifically says to define the groove directly on the screen. In customized grooving, the width and depth can also be changed after selecting the customized groove type. The permitted adjustment step is 0.05 mm.
