For an automatic bevel, the Mr Blue 2.0 accepts a height from 0.30 to 0.75 mm, with a default of 0.75 mm. If you need less than 0.75 mm, adjust the bevel directly on the edging screen.
Filed under Settings & modes
The automatic bevel height is constrained by the machine rather than being an unrestricted numeric entry. The default is the maximum automatic value.
- Default: 0.75 mm
- Minimum: 0.30 mm
- Maximum: 0.75 mm
To use a lower bevel, call up the shape, leave the bevel finish selected, press the controls for bevel height, and enter or select a value within the permitted range. The manual describes this adjustment for automatic beveling; it does not say that values outside the range are accepted.
This setting is separate from the shelf-bevel and flat-side values used for High-base bevel and Step bevel. Those finishes have different ranges and should not be adjusted through the automatic bevel-height control.
