Error codes — knowledge base | Optikmash

Contact us directly for special offers and discounts

Get a Quote

11 answers

nidek tonoref ii image 5

Nidek Tonoref II

What do BLK, ALM, FAR, NEAR, +OVR, -OVR and COVR mean in NIDEK TONOREF II AR/KM measurement?

In NIDEK TONOREF II AR/KM measurement, BLK means blinking or slight movement, ALM means improper focusing, FAR and NEAR identify…

Read: What do BLK, ALM, FAR, NEAR, +OVR, -OVR and COVR mean in NIDEK TONOREF II AR/KM measurement?

nidek tonoref ii image 5

Nidek Tonoref II

What do ALM, APL, OVR, PCE and BLK mean on the NIDEK TONOREF II?

On the NIDEK TONOREF II, ALM means alignment error, APL means insufficient corneal applanation, OVR means the IOP exceeds the…

Read: What do ALM, APL, OVR, PCE and BLK mean on the NIDEK TONOREF II?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

Why does the Bausch & Lomb Stellaris Phaco Machine show an incorrect cassette fluid level?

The manual attributes an incorrect cassette fluid-level reading to the cassette not being fully captured in the optimum position…

Read: Why does the Bausch & Lomb Stellaris Phaco Machine show an incorrect cassette fluid level?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

Why does the Bausch & Lomb Stellaris Phaco Machine report remote-control interference?

RCR05 means “Possible interference with remote control receivers.” Turn off or dim room lights, then check the remote functions…

Read: Why does the Bausch & Lomb Stellaris Phaco Machine report remote-control interference?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

What air pressure does the Bausch & Lomb Stellaris Phaco Machine require when CPX14 appears?

CPX14 means “Source pressure is low.” Increase the input pressure to 72.5 to 100 psi (5.0 bar - 6.9 bar).

Read: What air pressure does the Bausch & Lomb Stellaris Phaco Machine require when CPX14 appears?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

Why can’t I change phase or mode on the Bausch & Lomb Stellaris Phaco Machine?

UIC03 means “Phase/Mode change not allowed while surgical functions are in use.” Stop the active surgical functions, then change…

Read: Why can’t I change phase or mode on the Bausch & Lomb Stellaris Phaco Machine?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

Why did wireless foot control stop working on the Bausch & Lomb Stellaris Phaco Machine?

WFC19 means “The system has lost communications with the Foot Control, wireless disabled.” Connect the Foot Control cable to…

Read: Why did wireless foot control stop working on the Bausch & Lomb Stellaris Phaco Machine?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

How do I clear USM06 when the Bausch & Lomb Stellaris Phaco Machine says the ultrasound handpiece has not been tuned?

USM06 means “The ultrasound handpiece has not been tuned.” Select Setup, then select Prime / Tune or Tune Only before using…

Read: How do I clear USM06 when the Bausch & Lomb Stellaris Phaco Machine says the ultrasound handpiece has not been tuned?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

Why does the Bausch & Lomb Stellaris Phaco Machine say VFM11 System priming has failed?

VFM11 means “System priming has failed.” Check the irrigation and aspiration tubing for leaks and confirm that the test chamber…

Read: Why does the Bausch & Lomb Stellaris Phaco Machine say VFM11 System priming has failed?

bausch lomb stellaris phaco machine image 6

Bausch & Lomb Stellaris Phaco Machine

What does VFM14 mean on a Bausch & Lomb Stellaris Phaco Machine?

VFM14 means “The cassette is full.” Clamp the infusion line, empty and reinsert the cassette, select Prime, and then select…

Read: What does VFM14 mean on a Bausch & Lomb Stellaris Phaco Machine?

topcon triton multimodal swept source oct image 5

Topcon Triton Multimodal Swept-Source OCT

What does Topcon Triton error [509402] mean after a patient blinks?

[509402] means a blink was detected during fundus photography, so the Triton stopped the capture. Check that the patient's eye is…

Read: What does Topcon Triton error [509402] mean after a patient blinks?