Essilor Mr Blue 2.0 Edger and Tracer setWhy does the Essilor Mr Blue 2.0 ask me to change the engraving tool back?The engraving tip should be installed only for engraving cycles and must be replaced with the drill bit as soon as you return to…Read: Why does the Essilor Mr Blue 2.0 ask me to change the engraving tool back?
Essilor Mr Blue 2.0 Edger and Tracer setWhy is the Step bevel option greyed out on the Essilor Mr Blue 2.0?The Step bevel option is greyed out when the step bevel wheel has not been mounted. Fit the optional Step bevel tool before…Read: Why is the Step bevel option greyed out on the Essilor Mr Blue 2.0?
Nidek Tonoref IIHow do I connect a barcode reader to the NIDEK TONOREF II and print a patient ID?The NIDEK TONOREF II requires the optional barcode reader or magnetic card reader, connected by USB to the bottom USB-A port, and…Read: How do I connect a barcode reader to the NIDEK TONOREF II and print a patient ID?
Topcon Triton Multimodal Swept-Source OCTWhy does my Topcon Triton refuse anterior segment OCT capture with error [400410]?[400410] means the anterior segment lens unit is not installed; insert it before starting anterior segment OCT photography. If…Read: Why does my Topcon Triton refuse anterior segment OCT capture with error [400410]?
Bausch & Lomb Stellaris Phaco MachineWhat accessories and cable are required to set up the Bausch & Lomb Stellaris Phaco Machine?The initial setup requires the supplied Foot Control backup cable, compressed-air hose, power cord, and—if the optional MMC is…Read: What accessories and cable are required to set up the Bausch & Lomb Stellaris Phaco Machine?
Bausch & Lomb Stellaris Phaco MachineWhat should I do when the Bausch & Lomb Stellaris Phaco Machine reports a cassette type mismatch?UIC06 means the cassette type does not match the procedure type. Press Yes to enter the matching procedure type for the displayed…Read: What should I do when the Bausch & Lomb Stellaris Phaco Machine reports a cassette type mismatch?