Topcon Triton Multimodal Swept-Source OCT

10 answers, from working on these machines.

Myopia mode moves the standard interference position inward from its normal position when acquiring a tomogram of an excessively…

[301405] means transferring the data has failed, and the manual directs the operator to contact the service engineer. If the…

[509402] means a blink was detected during fundus photography, so the Triton stopped the capture. Check that the patient's eye is…

The Triton's Image Quality value (IQV) must be 40 or higher for a tomogram to be applicable to image analysis or other…

Over Scan Count repeatedly reads the same scan position to overlay tomograms and improve contrast, while Re-scan detects missing…

Re-scan automatically detects deviated or missing data caused by a blink or fixation movement and scans it again, but it can be…

Turning the focusing knob suspends the Triton's auto focus function. To resume auto focus, pull the base toward the operator and…

A dim white spot usually means the objective lens is stained or eyelashes entered the patient's eye area during alignment. Clean…

[400410] means the anterior segment lens unit is not installed; insert it before starting anterior segment OCT photography. If…

Scan Size is the physical length or range being scanned, while Scan Resolution is the amount of data read; higher resolution…